Autowatch Ghost Immobiliser
Ghost Immobiliser is a renowned product that protects your vehicle from key-cloning hacking and theft. This TASSA-certified system is not detected by thieves and prevents your vehicle from starting.
This silent device makes use of buttons located on the steering wheel, center console, and on the door panels of your vehicle to allow you to create an individual PIN code of up to 20 characters long that needs to be entered prior to the car will start.
Easy to install
With car theft on the rise and cloning equipment readily available it is more important than ever to protect your vehicle. Our Autowatch Ghost immobiliser is a discreet and effective aftermarket solution to protect against key-cloning and vehicle theft. The device is almost indestructible to thieves, and functions through buttons on the steering wheel or door panels. This allows customers to make an individual disarm sequence like credit card numbers that must be entered before the vehicle can begin or be driven away. This makes it nearly impossible to identify and is not affected by jamming devices or spoofing devices as with other systems.
The installation of the Ghost unit is a highly skilled procedure that must only be done by an approved installer. The unit is carefully incorporated into your vehicle's CAN bus network and is able to communicate directly with the ECU. This allows the Ghost to be installed without having to alter the factory settings and guarantees that it can't be hacked by a thief using signal boosters or other methods.
Once the Ghost is fitted with a new and improved sequence to disarm must be entered to turn on your car. Press the service button 5 times in a matter of 2 seconds, but ensure that you don't hold it for too long. The system will then blink twice to signal that Transport Mode has been activated. This feature is perfect for classic, sports or prestige vehicles that require their security system to be temporarily disabled during transportation or during servicing.
When please click the next internet page is activated the immobiliser will be disabled and you are unable to reactivate it by entering the PIN code. This feature is great for those who wish to store their cars during the winter months to keep theft, or to avoid having to pay higher insurance rates.
There are no keyfobs, LEDs, or other indicators to help you find it.
The Ghost immobiliser protects your car from theft by using buttons located on the steering wheel or dashboard. You can enter a pin number without being noticed before starting the engine. It wards off signal relay attacks, ECU swapping and key cloning. It can also be linked to a smartphone application to arm or disarm remotely. It's easy to install and can be incorporated into a wide range of vehicles. It's also extremely discreet and can be hidden in a difficult-to-find location, such as behind the dashboard or in the trim of the steering wheel.
It's an excellent option for cars with high performance because it can disable the ignition system of your vehicle if an incorrect pin code is entered, preventing thieves from driving off with your joy and pride. The device can notify an iPhone if the vehicle is left unattended while in public. This gives you peace of mind when you are away from your car.
Unlike other immobilisers, the Ghost does not require additional fobs or LEDs It can be concealed easily in a hard-to-reach location within your vehicle. It is highly indestructible to detection as it communicates directly with the CAN data network in your vehicle. It also doesn't emit radio signals, which makes it unnoticeable by RF scanners or signal jammers.
It is designed to be tamper-proof and weatherproof. It also has the ability to stand up to extreme temperatures. It is also unaffected by tampering with by cutting wires or removing the device. It's also inaccessible to organized gangs of thieves that use diagnostics reading equipment to detect security systems. It is not affected by professional diagnostic equipment that analyzes the CAN data for the presence or absence of a security system.
No circuit cuts
The ghost device does not have any LED indicators or key fobs to indicate its place of operation. It is hidden beneath the steering wheel or dashboard of your car and makes use of buttons to create a unique PIN sequence that has to be entered to turn on the engine. The thief is unable to drive away the vehicle even having your keys since they do not know the correct code. The device doesn't transmit radio signals meaning that organised gangs of thieves using diagnostics devices will be unable to recognize the device.
This innovative immobiliser, which is also TASSA-approved can assist you in reducing your insurance rates. This is especially relevant to vehicles that owners have customised. It also prevents key cloning theft as well as ECU swapping. This means that the only way the thieves can take your joy and pride is to remove it.
Because the system does not make use of the key fobs that are supplied by the factory or the dashboard buttons it is a completely silent device and communicates with your ECU through the CAN data circuit which operates completely silently and does not display any indication that it's fitted. It means that a criminal will not be able to make new key fobs or replace the ECU in order to get your car to start, which negates any other methods of theft employed in recent years such as key cloning scans using radio frequency and code grabbing.
Should you ever forget your PIN code, our engineers have provided you with an emergency reset for the device, which allows you to enter 'service mode'. This allows the dealer or technician to temporarily start and drive your vehicle enabling them to carry out maintenance work, MOTs or valet parking without needing to enter the PIN code again. When the technician is finished their task or you have removed your vehicle, simply enter the PIN code and the device will go out of service mode dependent on speed and duration.
No radio signals
In contrast to other security systems, the Ghost immobiliser doesn't use an alarm system or key fobs to stop vehicles from beginning. Instead it communicates with vehicle's ECU and the CAN data circuit to stop the engine from starting. It's a quiet solution, which is not affected by key-cloning techniques or RF scanning techniques used by thieves to avoid security devices. It can be used in conjunction with tracking devices to increase the security of your vehicle. You will also receive alerts if attempts are made to alter or steal.
The Autowatch Ghost, a TASSA certified device, is affixed to insurance and provides an excellent level of security against key hacking and copying. It is controlled by an app for mobile devices and is secured to protect. It also has a secure emergency PIN code bypass. It is a discreet effective and economical method to safeguard your vehicle from theft.
Ghost isn't without its problems. Many users have difficulty entering the correct sequence to disarm. This is because the device requires input through buttons already located in your vehicle, like those on the steering wheel or centre console. This can be difficult for users to remember, or they could be wrong the first time. It is recommended to study the manual included with the device in order to comprehend this, and to practice the disarming process before driving the vehicle.
Another issue is that some vehicles have problems with the CAN data connection, which can impact the functionality of the Ghost. This could be due to faulty sensors or a damaged OBD port. It is best to test the system again prior to using it to determine if there are any issues with the CAN connection.
It is easy to change the PIN code
The Ghost is a fantastic product that has enjoyed a great reception on the market. However changing the pin code can be confusing. The device is pre-programmed via the installer once it's fitted however, there are times when customers may prefer to change their pin code due to a variety of reasons, such as they'd like an alternative button to disable the device or they don't want their installer to know, or they just simply don't like the pin number they have currently. The good news is the switching to a different pin number is extremely simple. Follow the simple instructions below to find out how.
Note: You will need to switch on the ignition of your vehicle but do not start the engine! This process only takes several minutes. The vehicle will then resume normal operation.